RICHMOND, BC • SERVING METRO VANCOUVER
Concrete Driveway Installation & Replacement
Replace an ageing driveway or plan a new one with Can Concrete. We bring removal, ground preparation, forming, reinforcement, placement and finishing together in a clearly defined concrete scope.
Start with your location and a brief description. Photos and approximate measurements are helpful, not required.
The Problem
When It Is Time to Replace Your Driveway
Cracking, settlement and surface deterioration can have multiple causes — from base conditions and drainage to age and loading. When these concerns affect how you use the driveway or the appearance of your property, it may be time to consider replacement.
What We Do
How this service works
We remove the existing surface where needed, excavate and compact a proper base, set forms to the correct slope and elevation, place reinforcement within the quoted scope, and finish the concrete to the agreed texture.
Project Examples
Concrete Driveway Project Examples
Explore examples of our residential concrete driveway work.
Residential Concrete Driveway
Full view of completed residential concrete driveway leading to garage, with utility access and joints.
Driveway Beside Retaining Walls
Driveway bordered by tall hedge and stepped retaining wall setting, with edge formwork in place.
Textured Driveway & Patterned Border
Textured concrete driveway with patterned border in front of garage, protected during curing.
Curved Walkway Connection
Textured concrete walkway curving around planting bed and connecting to driveway with patterned border.
Concrete Surface & Edge Detail
View of textured concrete surface, control joints and curved raised edge detail.
Scope
What's included — and what isn't
Every quote identifies the scope, the handoff, and what is by others. Here's what this service typically covers.
Included scope
- Removal and haul-away of existing concrete or asphalt where needed
- Excavation and granular base preparation with compaction
- Forming to layout, slope and elevation
- Reinforcement within the quoted scope (rebar or mesh as specified)
- Concrete placement, finishing and jointing
- Stripping of forms and site cleanup
By others / exclusions
- Subgrade or geotechnical requirements beyond the agreed scope
- Utility, drainage or electrical work by other trades
- Lighting and landscaping by others
- Permits and municipal approvals where required
We offer complete installation and defined contractor-support scopes. Your written estimate sets out the agreed scope, including responsibility for concrete supply, pumping where needed, curing/protection, and any work by others. Decorative concrete borders can be included when specified in the written estimate.
Process
How the work proceeds
A clear sequence so you know what happens and when.
- 1
Review the project
We look at the existing surface, dimensions, access, intended use and connections, then agree the scope and finish choices in writing.
- 2
Agree the work
The written scope sets out finish choices, responsibilities and the proposed sequence before any work proceeds.
- 3
Remove and prepare
Demolition and disposal where needed, followed by excavation, base and compaction to the agreed depth.
- 4
Form and reinforce
Forms are set to layout, levels and drainage considerations, with specified reinforcement placed within the quoted scope.
- 5
Place and finish
Concrete is placed, levelled and finished to the selected texture, with joints cut or tooled as planned.
- 6
Protect and complete
Agreed protection and curing responsibilities, form stripping, cleanup and vehicle-use instructions for the project.
Options
Finishes, applications & suitability
Broom-Finished Concrete
A clean, textured concrete appearance for an exterior driveway. Review the texture and finished look as part of the project.
Exposed Aggregate
Visible stone creates a different texture and appearance. Review aggregate and colour choices with the proposed concrete mix.
Stamped & Coloured Concrete
Pattern and colour options for a decorative result. Discuss the intended vehicle use, surface texture, sealing and maintenance before choosing a treatment.
Why Can Concrete
How we approach this work
We bring removal, preparation, forming and finishing together in one coordinated scope, so the people who prepare the base are the same people who finish the surface. You get a clear point of contact, a written scope and direct communication throughout the project.
Clear Project Scope
Understand the proposed work, inclusions and responsibilities before construction begins.
Care in the Work
Attention to preparation, layout and installation details, not only the finished appearance.
Accountable Communication
A clear point of contact for project questions, changes and next steps.
Recent Work
Project examples of this work
Real Can Concrete projects that included this service. Open any project to see the full scope, photos and result.
Residential
Residential Concrete Driveway Replacement
Removal of an existing driveway and installation of a new textured concrete driveway with a patterned border, leading to a residential garage.
Residential
Concrete Steps & Front Entry System
Concrete stair runs and a front entry step system with decorative finishes, landings and connecting walkway work.
Cost
What affects project cost
Your estimate reflects the driveway size, existing conditions, access, preparation requirements and selected finish. Photos and approximate measurements help us understand the work before confirming the next step.
- Removal and access: existing surface, hauling, excavation and access constraints
- Construction requirements: area, intended loading, base, concrete thickness and reinforcement specified for the job
- Finish and detailing: broom, exposed aggregate, decorative work, edges and connections
- Coordination: concrete delivery or pumping, related concrete and any agreed additional trades or requirements
FAQ
Questions about this service
Do you remove and dispose of the old driveway?+
Yes, removal and disposal can be included in the agreed driveway scope. Existing conditions and access are reviewed when pricing the work.
Do I need exact measurements or a chosen finish to get started?+
No. Send the location and a short description. Photos and rough measurements help, and finish choices can be discussed during the review.
Should I repair or replace the driveway?+
The appropriate scope depends on the damage, movement, use and site conditions. Describe the concerns and share photos where possible; further site review may be needed before recommending work.
Can you include the front steps or walkway?+
Yes, adjoining concrete can be reviewed as part of the same project. The quote identifies the included work.
How will access and scheduling be handled?+
Access, deliveries and the proposed sequence are discussed before construction. Weather, inspections and concrete availability can affect sequencing, and we communicate changes as they arise.
When can I park on the new concrete?+
Vehicle access must follow the project-specific curing and protection instructions. Confirm those arrangements for the concrete and site conditions rather than relying on a fixed time stated online.
Related
Connected services
Ready to Plan Your Driveway?
Tell us where the project is and what you would like to change. Add photos or approximate measurements when available. We will review the information and contact you about the next step.